Welcome to Superior Doors

Home

Flush Panel

Grooved Panel

Standard Designer Options

Core Options


	The Superior doors Kent standard designer door.


*Kent*

	BT	BB	BL	BR	MR	PH	PW	NP

310	150	150	124	124	150	460	62	3
360	150	150	144	144	150	460	72	3
410	150	150	164	164	150	460	82	3
460	150	150	184	184	150	460	92	3
510	150	150	204	204	150	460	102	3
560	150	150	224	224	150	460	112	3
610	150	150	244	244	150	460	122	3
660	150	150	264	264	150	460	132	3
710	150	150	284	284	150	460	142	3
760	150	150	304	304	150	460	152	3
810	150	150	324	324	150	460	162	3
860	150	150	344	344	150	460	172	3
910	150	150	364	364	150	460	182	3
960	150	150	384	384	150	460	192	3
1000	150	150	400	400	150	460	200	3
1100	150	150	440	440	150	460	220	3
1200	150	150	480	480	150	460	240	3

BT - Border Top BB - Border Bottom BL - Border Left BR - Border Right MR - Mid Rail PH - Panel Height PW - Panel Width NG - Number of Grooves NP - Number of Panels

--Superior Technology

--Door Construction

The typical Superior Doors door is constructed with impact resistant RibCore, a set of rails and stiles, a lock block and 2 skins. To ensure that all doors are of the highest quality each individual pine rail is sighted and graded for straightness and strength. The RibCore is machined precisely to size to gain the greatest strength from its glued contact with the skin to ensure the flattest door possible.

--Benifits

• Up to 42% lamination with polystyrene rib core compared with approximately 4% from traditional honeycomb cores.
• Will not delaminate after impact.
• Will assist insulation for both noise and
heat between the rooms in your home.



Polystyrene RibCore provides a cost effective method of increasing the strength of a hollow core door. The core is processed in a way that alternates the line of the grooves between the two sides. Greater contact between the surface of the core and the door skin leads to a much stronger, flatter, impact resistant door	As an alternative to a standard solid core door, Superior Doors Ltd provides the option of the Premium EPS core. This is a high grade polyfoam core that enhances thermal and acoustic retention abilities as well as providing greater impact resistance. The EPS core does all this while being cost effective, easier to handle and much lighter than traditional solid core doors.	For those who require a door with high impact resistance we offer the HMR Particle Board solid core option. The core in this door uses high moisture resistant board which creates the ultimate in strength and durability.