Welcome to Superior Doors

Home

Flush Panel

Grooved Panel

Standard Designer Options

Core Options


	The Superior doors Surry standard designer doors.


*Surry*

	BT	BB	BL	BR	MR	BPH	PW	NG

310	110	200	110	110	150	650	90	2
360	110	200	110	110	150	650	140	2
410	110	200	110	110	150	650	95	3
460	110	200	110	110	150	650	120	3
510	110	200	110	110	150	650	96.66	4
560	110	200	110	110	150	650	113.33	4
610	110	200	110	110	150	650	97.5	5
660	110	200	110	110	150	650	110	5
710	110	200	110	110	150	650	98	6
760	110	200	110	110	150	650	108	6
810	110	200	110	110	150	650	98.33	7
860	110	200	110	110	150	650	106.67	7
910	110	200	110	110	150	650	98.57	8
960	110	200	110	110	150	650	105.71	8
1000	110	200	110	110	150	650	97.5	9
1100	110	200	110	110	150	650	97.78	10
1200	110	200	110	110	150	650	98	11

BT - Border Top BB - Border Bottom BL - Border Left BR - Border Right MR - Mid Rail BPH - Bottom Panel Height PW - Panel Width NG - Number of Grooves NP - Number of Panels

--Superior Technology

--Door Construction

The typical Superior Doors door is constructed with impact resistant RibCore, a set of rails and stiles, a lock block and 2 skins. To ensure that all doors are of the highest quality each individual pine rail is sighted and graded for straightness and strength. The RibCore is machined precisely to size to gain the greatest strength from its glued contact with the skin to ensure the flattest door possible.

--Benifits

• Up to 42% lamination with polystyrene rib core compared with approximately 4% from traditional honeycomb cores.
• Will not delaminate after impact.
• Will assist insulation for both noise and
heat between the rooms in your home.



Polystyrene RibCore provides a cost effective method of increasing the strength of a hollow core door. The core is processed in a way that alternates the line of the grooves between the two sides. Greater contact between the surface of the core and the door skin leads to a much stronger, flatter, impact resistant door	As an alternative to a standard solid core door, Superior Doors Ltd provides the option of the Premium EPS core. This is a high grade polyfoam core that enhances thermal and acoustic retention abilities as well as providing greater impact resistance. The EPS core does all this while being cost effective, easier to handle and much lighter than traditional solid core doors.	For those who require a door with high impact resistance we offer the HMR Particle Board solid core option. The core in this door uses high moisture resistant board which creates the ultimate in strength and durability.